Download T800XXU1CPH7 Android 6.0.1 Marshmallow latest firmware for SM-T800. Install XXU1CPH7 Android 6.0.1 Marshmallow official firmware update on Samsung Galaxy Tab S 10.5 SM-T800 that rolled out in New Zeland; and can also be downloaded for a manual update. Latest SM-T800 6.0.1 firmware update offer a better security and performance. Continue reading this guide to learn how to get official stock T800XXU1CPH7 Android 6.0.1 Marshmallow firmware running on Galaxy Tab S 10.5 SM-T800. Nearly all possible ways to update your device to this firmware is discussed here. One thing you should note that flashing or installing official firmware restore kernel hence your root access will be void, in short it will unroot it.
T800XXU1CPH7 Android 6.0.1 Marshmallow stock firmware available on both OTA and Kies update. However, if you can’t get it from there then you can always flash T800XXU1CPH7 Android 6.0.1 Marshmallow firmware on Galaxy Tab S 10.5 SM-T800 manually. We will discuss all available update methods. You can use this firmware to upgrade your device SM-T800 from 5.0.1 Lollipop to 6.0.1 Marshmallow. You should always try OTA or Kies method first and when both method don’t work then only try manual flashing.
How To Install T800XXU1CPH7 Android 6.0.1 Marshmallow On Galaxy Tab S 10.5 SM-T800 Manually
- Download Download Odin3 v3.12.3 and T800XXU1CPH7 firmware.
- Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
- Extract Odin zip file and you will get Odin3 v3.12.3.exe along with few other files.
- Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
- Now, put the Galaxy Tab S 10.5 SM-T800 in Download Mode by pressing and holding down the Home &Volume Down button together while pressing the Power button. A warning screen will come up; pressVolume Up button to enter Download Mode.
- Now run Odin3 v3.12.3.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
- Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
- Click the AP Button, and select that .tar.md5 file that you get in Step 2.
- In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
- Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
- Once flashing completed, your Galaxy Tab S 10.5 SM-T800 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Congrats! You just updated your Galaxy Tab S 10.5 SM-T800 to Android 6.0.1 Marshmallow firmware. Go toSettings > About device to verify this firmware update.
Fix Boot Loop Issue On Galaxy Tab S 10.5 SM-T800
If Galaxy Tab S 10.5 SM-T800 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
- Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
- Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.
That’s it! Let us know about your latest Android 6.0.1 Marshmallow experience.
Posts
No comments:
Post a Comment